Not much to explain since the last post, but I will post some more images of me wrapping up the circuit:

Towards the end of the board...:

A little messy soldering :(  :

Still missing the 0.1uF:

By the way, great companion to the soldering station:

I had problems with the knobs not fitting onto the potentiometers, so I used a 1/4 drill bit and just twisted by hand:

Worked on a circuit that sits under the chassis.  By the way, the alligator clips are used as a heatsink:

Soldering wires that will go to the tubes:

Be back next time, hopefully with my capacitors!